Water Proofing

 

 

 

 

Several Products make up our Water Proofing range
   
   
Ash Coatings Pty Ltd  
   
   
  -Acrylkote
 
  Samsonide Acrylkote R.F is a one pack high solid Water Based Acrylic Co-Polymer Water Proof Membrane, with reinforced fibres added.    
  -USES:  
 

Samsonide Acrylkote R.F is used as a low cost waterproofing membrane for
roofs, walls, ramps, balconies. bathrooms and wet areas etc.

   
  -OUTSTANDING FEATURES:  
 
  • Environmentally safe low toxicity.
  • Easy application by brush, roller, or spray.
  • Excellent Hi Build properties, making it suitable for both horizontal and
    vertical surfaces.
  • Highly flexible, stable over a large temperature range allowing movement
    in the substrate.
  • Excellent resistance to U.V weather, ponding, mould, mildew, and micro bionic attack.
  • Resists mechanical and chemical damage.
  • Wash up and clean up in water.
  • Available in a range of colours.
    
       
  -Bitgrip H2O
 
  Samsonide Bitgrip H2O is a waterbased bitumen - latex emulsion, displaying a creamy paste viscosity, used in a range of construction applications as either a waterproofing sealant, adhesive and coating. When cured, Samsonide Bitgrip H2O forms a flexible and durable waterproof film.
   
  -USES:  
  Samsonide Bitgrip H2O is used in waterproofing applications, forming a waterproof coat to substrates applied. It is flexible and has the ability to be layed up to 10mm thick. Also used in sound dampening applications, minimising resonation over metal products and vibration, whilst retaining its flexibility.

Samsonide Bitgrip H2O is a waterproof liquid membrane sealant for underground areas, internal and external surfaces, including concrete, brick, masonry, timber, cement sheet, plasterboard, gutters and metals (not raw steel).

   
  -ADVANTAGES:  
 
  • Samsonide Bitgrip H2O can be applied over damp surfaces (free of ponding water).
  • Approved for potable water applications, tested to AS4020 (Int) - 1994 by the Australian Water Quality Centre.
  • Thixotropic consistency ensures a total seal around joints, flashing, valves, rivets, bolts and seals (will not adhere non-porous surfaces together).
  • Samsonide Bitgrip H2O is 100% waterproof adhesive.
  • It is 100% salt water resistant and UV resistant.
  • Non flammable, free of solvents and toxins.
  • It has an ability to cure quickly. Ability to mix with mortar, render and concrete.
  • Self priming - Primer can be formed by diluting 1 part Samsonide Bitgrip H2O into 3 parts water, to avoid rapid absorption and enhanced adhesion.
   
 
 
Copyright© - Australian Paint Industries Pty Ltd